 |
EMS 2018 is a fully embedded add-in to SOLIDWORKS and Autodesk Inventor. The 2018 release comes with several new features and updates:
|
| |
| Enhancement in the AC resistance and induction calculations
In AC Magnetic analysis, due to the skin and proximity effects, the inductance and resistance of a coil are different from DC. EMS takes both effects into consideration and accurately computes the resistance and inductance matrices. Figure 1 shows the resistance results computed by EMS compared to published data in TEAM problem 15.
|
Figure 1: EMS and TEAM 15 results of AC resistance variation
|
| Enhancement in structural coupling
AC Magnetic and Electrostatic modules can now be fully coupled to Structural Analysis. Figure 2 shows the deformation in a MEMS comb actuator.
|
Figure 2: Displacement in a MEMS comb actuator
|
| Improvement of the circuit parameters computation
Inductance, impedance, resistance, flux linkage, and induced voltage are now computed faster and more acccurately.
|
Figure 3 : Impedance variation of crack detector coil at different frequencies
|
Get your free trial 
|
HFWorks 2018 is a Gold Certified add-in to SOLIDWORKS. The 2018 release comes with several new features and updates:
|
| |
| New Thermal Stress coupling
HFWorks 2018 can now compute structural deformation due to thermal stress caused by high frequency losses. Figure 4 shows the deformation of a straight waveguide.
|
Figure 4 : Structual deformation of a straight waveguide
|
| Enhacement of Thermal Analysis
Thermal results generated by HFWorks 2018 are now computed faster and more acccurately. Figure 5 shows a tempreture distrubution of a double ridge waveguide at a power of 250 kw
|
Figure 5 : The temperature distribution at 0.353 GHz double ridge waveguide at a power of 250kw
|
| Adaptive Mesh Refinement
HFWorks 2018 now supports adaptive meshing. Figure 6 shows an adapted mesh of a coax to a waveguide transition.
|
Figure 6 : An adapted mesh of a coax to a waveguide structure
|
Get your free trial 
|
| EMWorks 2D
EMWorks 2D is a whole new package for 2D Electromagnetic simulation. EMWorks 2D is fully embeded in SOLIDWORKS. Beta version starts on Feb 5, 2018. If you are interested in trying the Beta version, please send a request to beta@emworks.com.
|
Figure 7 : Potential distrubution of a stripline using EMWorks 2D
|
| MotorWizard
You no longer need to be an expert in SOLIDWORSK to build your 3D/2D motor models. Using the new MotorWizard, you now can customize, preview and simulate your motors in a single environment in a record time. If you are interested in trying the Beta version, please send a request to beta@emworks.com.
|
Figure 8 : Simulation of switched reluctance motor usig the new MotorWizard
|
 |
|
 |
|
 |
|
DesignCon 2018
SANTA CLARA CONVENTION CENTER, SANTA CLARA, CA
Booth #104
Tuesday, January 30, 2018
|
|
SOLIDWORKS WORLD 2018
LOS ANGELES, CA
Booth #510
Sunday, February 4, 2018
|
|
Motor & Drive Systems 2018
ORLANDO, FL
Booth #301
Thursday, February 8, 2018
|
| Join us for a free one day seminar to learn EMS and HFWorks and attend hands-on sessions to experience the unmatched ease of use of EMWorks products. |
|
 |
|
| |
January 16, 2018
8:00 am to 4:30 pm
Oakville, Ontario, Canada
|
| |
|
 |
|
|
|
